Standard Heavy Duty Hook Lift Flatbeds From 5.8m - 7.32m other sizes can be manufactured to meet specific requirements.
The Roll-on Roll-off flat body is designed to carry plant and machinery. The body is fitted with ramps and tie-down rings so machinery can be loaded and transported safely. The body is heavy-duty and able to withstand the weight of heavy machinery.
Heavy Duty Flatbeds designed for moving heavy plant and materials. Fitted with ISO twist locks set into deck suitable for ISO freight boxes numerous options to customise the flatbed to your needs including tailgate/ramps.
Standard Length Sizes:
Length | Weight Kgs | Category | Lift Type | Rear Door Type | Headboard Thickness | Floor Thickness | Door Plate Thickness | Subframe Bolster | Locking Type |
5.8m | 2338 | Plant flat | Hook | Ramp | 4 | 6 | 4.5 | 100X100 | Ramp Fastener |
5.8m | 2137 | Plant flat | Hook | N/A | 4 | 6 | 4.5 | 100X100 | Ramp Fastener |
7.32m | 2416 | Plant flat | Cable | N/A | 4 | 6 | 4.5 | 100X100 | Ramp Fastener |
7.32m | 2675 | Plant flat | Hook | Ramp | 4 | 6 | 4.5 | 100X100 | Ramp Fastener |
6.5m | 2778 | Plantflat | Hook | Ramp | 4 | 6 | 4.5 | 100X100 | Ramp Fastener |
7.32m | 2705 | Plant flat | Hook | Ramp | 4 | 6 | 4.5 | 100X100 | Ramp Fastener |
6.35m | 2587 | Plant flat | Hook | Ramp | 4 | 6 | 4.5 | 100X100 | Ramp Fastener |
Ideal Applications
Transportation of Plant & Machinery
Transportation of 10 foot & 20 foot ISO freight boxes
Summary
Heavy Duty Hooklift Plant Flat:
ISO twist locks set into deck to take either 10 foot or 20 foot ISO freight boxes.
6mm Durbar plate deck.
10 floor cross members supporting the deck plate
Captive welded Bale Bar to ensure continued strength of repeated lifting.
Hinged rear tailgate which is spring-loaded and balanced to fall down to be used as a loading ramp. The supporting posts for this tailgate are removable.
5 heavy-duty lashing rings welded down each side.
Ramp Plate over Bale Bar.
Bale Bar captive welded in channel.
Cheek Plates in ‘A’ Frame and Bale Bar
230mm x 75mm PFC longitudinal runners
180mm x 75mm PFC ‘A’ frame
Gusset plates fitted to ‘A’ Frames
Steel rollers fitted with ‘Oilite’ Brushes
Manufactured to CHEM Standard
Deck
6mm Durbar chequer plate floor
Rear Tailgate
4mm Durbar plate with 100 x 50 RSC frame. Supported by two ramp springs and held in place by ramp fasteners. Unfastening the ramp fasteners allows the tailgate to be lowered to form the ramp.
Headboard
4mm plate with 100mm x 50mm RSC frame and 100mm x 100mm RHS Bolster.
Paint
Painted to a standard RAL/BS colour. Customer to specify
ID Marks
Welded codes as specified by the customer (Location and code reference)