DJE RECYCLING SYSTEMS . SPECIALIST SUPPLIERS . BIOMASS HOOKLIFTS . MATERIAL RECYCLING HOOKLIFT CONTAINERS .  CHAIN LIFTSKIPS .FEL .REL .SKIPS . CONTINENTAL RECYCLING BINS . VEHICLE WEIGHING SOLUTIONS (VWS). EXCAVATOR AND FRONT END LOADER ATTACHMENTS.HARSH SHEETING SYSTEMS.GURNEY REEVE SUTON SWEEPERS AND ATTACHMENTS .TELEPHONE : 01709 730341:Email:info@djerecyclingsystems .com :

 

«»
17 JUNE DROP DOOR SKIPS
17 JUNE BOAT SKIPS 2 - 22 CUBIC YARDS
17 JUNE BUILDERS SKIPS
10 JULY 2015 MULTI STACK CHAIN LIFT SKIPS
17 JUNE 2015 MINI MIDI MAXI SKIPS

Skips from 4 - 10 cu yd fitted with Ramp drop loading doors.

Drop Door Ramp Skips 4 - 10 Cubic Yards are best suited for general waste medium to heavy loads and used in Domestic, Commercial & Industrial Hire, garden clearance, scrap metal, general builders waste and construction waste and general waste collection.

Drop Down Ramp Skips can also be customised to suit heavier loads by using a stronger frame structure and plate thickness.

Comprising of a base construction of 3mm sides and ends and a 4mm floor and Drop forged Meiller lifting lugs. These fully welded skips come fitted with tipping bars at both ends and a hinged drop door fitted at one end for easy use with wheel barrow loading.

Body
Constructed from 3mm side plates with 4mm end plates and floors. Frame stiffeners are 76 x 38 RSC, which also support the drop forged meiller lifting lugs.

The lugs have 6mm thick backing plates which are welded to the inside face of the side plates.

A 32 diameter tipping bar is fitted to either end of the skip. Corners are gusseted for extra strength.

Rope hooks are fitted to sides and ends. Heavier plate can be used for heavier application.

All plates are fully welded inside and outside.

One end is fitted with a hinged drop down ramp door.

The door is made from 4mm plate with a 50 x 50 RHS frame.

The door is hinged and held in the closed position by lift-on catches and sliding pins for safety.

Finish
Containers are cleaned, degreased and coated with a one coat paint finish to 150 microns minimum in accordance with DOE PG6/23.

Fitted with rope hooks as standard and painted to a standard RAL/BS colour as specified by the customer.