DJE RECYCLING SYSTEMS . SPECIALIST SUPPLIERS . BIOMASS HOOKLIFTS . MATERIAL RECYCLING HOOKLIFT CONTAINERS .  CHAIN LIFTSKIPS .FEL .REL .SKIPS . CONTINENTAL RECYCLING BINS . VEHICLE WEIGHING SOLUTIONS (VWS). EXCAVATOR AND FRONT END LOADER ATTACHMENTS.HARSH SHEETING SYSTEMS.GURNEY REEVE SUTON SWEEPERS AND ATTACHMENTS .TELEPHONE : 01709 730341:Email:info@djerecyclingsystems .com :

 

«»
APRIL 21 SKIPS REL AND FEL
11 APRIL TAYLOR CONTINENTAL RANGE FRONT PAGE BANNER
10 JUNE 2015 HB RANGE VERTICAL BALERS
13 MAY 2015 SELLERS HOOKLIFT RANGE



Rear End Load Steel Lidded Containers

REL Steel Lidded Rear End Loading Containers Sizes from 6 Cubic Yard ¬ 16 Cubic Yards Containers are for use with rear end loading vehicles are available from 6 cu yd to 16 cu yd capacities with lugs welded on for use with conventional skip vehicles too.

The Rear End Load Steel Lidded Containers are built for use with Rear End Loading Vehicles but have lugs welded on for use with conventional skip vehicles too. Best suited for Light to medium loads for general waste collection where the load is to be held securely preventing wind scatter or scavenging.

Manufactured using 3mm Steel sides and, roof & rear plates, with 4mm front end & floor plate with double skinned plastic lids fitted to front, Steel Lids are double hinged and fold back onto the roof of the container when emptying. Steel Lid opening handles supplied as standard build. These come fully welded inside and out and have Front stabilisers to prevent front end tipping forward if incorrectly loaded with a 35mm diameter skip tipping bar fitted as standard.

Standard Features & Benefits

Designed for use with light to medium loads, with unique features which ensures each container is strong and durable.


Steel Lids: are double hinged and fold back onto the roof of the container when emptying. Lid opening handles supplied as standard.

Rear double doors which fold back to the container sides when loading
50mm pivot pins which align with REL vehicle
Drop forged Meiller lifting lugs fully welded through channel & 6mm backing plate
All section joints mitred and fully welded
Plates fully welded internally and externally
Under floor runners to prevent corrosion of floor plate
Front stabilisers to prevent front end tipping forward if incorrectly loaded
35mm dia. skip tipping bar fitted as standard

Plate Thickness: 3mm sides, roof & rear plate with 4mm front end & floor plate

Frame Structure: 80 x 40 RHS with 76 x 38 RSC supporting skip lugs

Paint: Painted to a standard RAL/BS colour. Customer to specify.

ID Marks: Welded codes as specified by the customer (Location and code reference)


Build Options

Heavy Gauge: Side plates Side Plate thickness can be increased to 4mm

Drain Holes: Holes cut in each corner of the floor, or BSP sockets and plugs welded at the lowest point on the side plates

Pivot Pins: Loose or retractable pins available in place of standard fixed pins

Logo/Vinyl: As required by the customer, to give clear instructions to the user/consumer. Colours and logo details to be supplied by the customer.