DJE RECYCLING SYSTEMS . SPECIALIST SUPPLIERS . BIOMASS HOOKLIFTS . MATERIAL RECYCLING HOOKLIFT CONTAINERS .  CHAIN LIFT SKIPS.FEL .REL .SKIPS . CONTINENTAL RECYCLING BINS .HARSH SHEETING SYSTEMS. .TELEPHONE : 01709 730341:Email:info@djerecyclingsystems .com :

 

«»
BURGESS 1
BURGESS 3
BURGESS 5
BURGESS 4
BURGESS 6

Smooth Line Smooth Sided Sizes Hooklift Containers from 16 cubic yard to 55 cubic yard for use with light to heavy loads, with unique features that ensures each container is strong and durable, often outlasting customers’ expectations. Overlapping Curved Smooth sides, the overlapping plates down the horizontal centre of the sides, along with the curve in the plate, give strength to the construction.

         

Summary Designed for use with light to heavy loads, with unique features which ensures each container are strong and durable, Overlapping Curved Smooth sides, the overlapping plates down the horizontal center of the sides, along with the curve in the plate, give strength to the construction.

Single door with ratchet locking, secondary locking, and unique door hold back

Heavy-duty box section Top Rail for additional strength

Standard Build

Ramp Plate over Bale Bar

Internal & External Welded

Bale Bar captive welded in channel

Rope/Tie Down point on either side of

Cheek Plates in ‘A’ Frame and Bale Bar container

‘A’ Frame 180mm x 75mm PFC

Manufactured to CHEM Standard

Gusset plates fitted to ‘A’ Frames

Steel roller fitted with Oilite bushes

Side Thickness 4mm top plate overlaps the 4mm curved lower plate by 300mm

Top Rails 120mm x 80mm x 5mm RHS top rails

Base 4mm with 7 off - 140mm x 75mm x 4mm pressed channel cross members

Door 6 Panel door, 3mm plate with 80mm x 80mm x 3mm RHS frame

Locking is a ratchet turnbuckle system with a secondary locking pin, this operates a heavy-duty locking mechanism

Door hold back is a Labyrinth Plate with gravity catch as standard

3 hinges fitted with grease nipples

Headboard 4mm plate with 100mm x 100mm RHS Bolster above ‘A’ frame

Paint Painted to a standard RAL/BS colour. Customer to specify.

ID Marks Welded codes as specified by the customer (Location and code reference)

Should you require any of the following options please call (01709-730341) or email us at info@djerecyclingsystems.com 

Spreader Bars Raised or removable Spreader Bar

Door Seals Unique profile rubber door seal in steel channel to ensure the leakproof container

Roof/Lid Either Hydraulic roof, Rolling roof, or enclosed

  

Door Configuration. Doors can be Single Door (standard) Top Hinged or Double Door arrangements

Logo/Vinyl As required by the customer, to give clear instructions to the user/consumer. Colours

and logos to be supplied by the customer.

Ladders(s) Finish 1.2m from the top of the container

 

 

 

 










Build Options