DJE RECYCLING SYSTEMS . SPECIALIST SUPPLIERS . BIOMASS HOOKLIFTS . MATERIAL RECYCLING HOOKLIFT CONTAINERS .  CHAIN LIFTSKIPS .FEL .REL .SKIPS . CONTINENTAL RECYCLING BINS . VEHICLE WEIGHING SOLUTIONS (VWS). EXCAVATOR AND FRONT END LOADER ATTACHMENTS.HARSH SHEETING SYSTEMS.GURNEY REEVE SUTON SWEEPERS AND ATTACHMENTS .TELEPHONE : 01709 730341:Email:info@djerecyclingsystems .com :

 

«»
1 A HOOKLIFTS
APRIL 29 2015 BUILD OPTIONS HOOKLIFTS
APRIL 29 2015 SMOOTH SIDED WITH TEXT
APRIL 29 2015 SWAGED SIDE HOOKLIFT CONTAINERS WITH TEXT
APRIL 29 2015 SPECALIST REL FEL



All demolition rehandling hooklift containers comply fully with HSE Health and Safety Executive (HSE) in consultation with the Waste Industry Safety and Health (WISH) All hooklift containers exceed CHEM Standards and compliances.


40 Cubic Yard Hooklift Demolition Recycling RoRo, Ribbed. Heavy Duty suitable for Demolition Recycling, Site Clearance, Civil Engineering, Plant Hire, Contractors.

Designed for use, where heavy items are contained for transport, with unique features to ensures each container is extremely strong, durable and long lasting, to withstand the frequent and daily loading and unloading by machine within inhospitable environments.

Built and Manufactured :

Swaged sides for rigidity

7 uprights for additional strength
15 floor cross members to take the impact of heavy items being constantly loaded
Captive welded Bale Bar to ensure continued strength of repeated lifting

Heavy duty box section Top Rail for additional strength
Single door with ratchet locking, secondary locking and unique door hold back
Ramp Plate over Bale Bar
Bale Bar captive welded in channel
Cheek Plates in ‘A’ Frame and Bale Bar
 ‘A’ Frame 180mm x 75mm PFC
Gusset plates fitted to ‘A’ Frames
Steel roller fitted with ‘Oilite’ Brushes
Internal & External Welded
Rope/Tie Down point on either side of container
Spreader Bar 160mm x 80mm RHS



Manufactured and exceeding CHEM Standard

Sides: Swaged with 7off 140mm x 76mm x 3mm pressed channel uprights

Top Rails :160mm x 80mm x 5mm RHS top rails

Base: 15 off -140mm x 76mm x 4mm pressed channel cross members

Container Static Weight: 3645 Kgs

Door:
• 9 Panel door, 4mm with 80mm x 80mm x 3mm RHS frame
• Locking is a Ratchet Turnbuckle system with a secondary locking pin, this operates a heavy duty locking mechanism
• Door hold back is a Labyrinth Plate with Gravity Catch as standard
• 4 hinges fitted with grease nipples

Headboard: 80mm x 80mm RHS frame and 100mm x 100mm RHS Bolster

Container Static Weight: 3645 Kgs

Paint: Painted to a standard RAL/BS colour. Customer to specify

ID Marks: Welded codes as specified by the customer (Location and code reference)

Build Options - Description

Should you require any of the following options please call ( 01709 - 730341) or email us.

Spreader Bars: Removable Spreader Bar

Door Seals: Unique profile rubber door seal in steel channel to ensure leak proof container

Flatsided: To have the side flat rather than swaged

Roof / Lid: Either Hydraulic roof, sliding roof or enclosed

Door Configuration: Doors can be Single Door (standard) Top Hinged or Double Door arrangements

Logo / Vinyl: As required by the customer, to give clear instructions to the user/consumer. Colours and logos to be supplied by the customer.

HSE directives state: ladders are not permitted on containers, as this is impractical, our solution is to put a half height
ladder 1.2m below the top rail, this allows the operator to see what’s inside with no danger of falling in.

Ladder(s)
• Finish 1.2m from top of container
• 40mm x 40mm RHS Frame
• 20mmm dia. solid rungs

Signboards: On either side or ends of the container and/or the door, providing opportunity for company name, logo and phone number or type of waste to be collected





Hook Lift Containers
     7 - 55 Cu Yd