DJE RECYCLING SYSTEMS . SPECIALIST SUPPLIERS . BIOMASS HOOKLIFTS . MATERIAL RECYCLING HOOKLIFT CONTAINERS .  CHAIN LIFTSKIPS .FEL .REL .SKIPS . CONTINENTAL RECYCLING BINS . VEHICLE WEIGHING SOLUTIONS (VWS). EXCAVATOR AND FRONT END LOADER ATTACHMENTS.HARSH SHEETING SYSTEMS.GURNEY REEVE SUTON SWEEPERS AND ATTACHMENTS .TELEPHONE : 01709 730341:Email:info@djerecyclingsystems .com :

 

«»
1 WHD
2 WHD
3 WHD
4 WHD
5 WHD

WHD 40 Cu Yd Hooklift Container recycling skip, designed and manufactured for businesses that operate high tip, extended loader arms, hydraulic operated grabs, waste compactor rollers and tampers.

WHD 40 Cubic yard RORO Hooklift Container Designed with the specific challenges of the waste industry in mind. with unique features to ensures each container is extremely strong, durable and long lasting, to withstand the frequent and daily loading and unloading by specialist machinery used by the waste recycling sector.


Swaged sides for rigidity

7 uprights for additional strength

15 floor cross members to take the impact of heavy items being constantly loaded

Sub-frame - 180x75 RSC runners

Cheek Plates in ‘A’ Frame and Bale Bar

A’ frame fitted with 65mm diameter lifting bar.

Gusset plates fitted to ‘A’ Frames

Captive welded Bale Bar to ensure continued strength of repeated lifting

Heavy duty box section Top Rail for additional strength

Single door with ratchet locking, secondary locking and unique door hold back



Standard Build

Ramp Plate over Bale Bar

Bale Bar captive welded in channel

Cheek Plates in ‘A’ Frame and Bale Bar

A’ frame fitted with 65mm diameter lifting bar.

Gusset plates fitted to ‘A’ Frames

Steel roller fitted with ‘Oilite’ Brushes

All seams Internal & External Welded 

Rope/Tie Down point on either side of container 

Fixed flush spreader bar 160mm x 80mm RHS

Manufactured to CHEM Standard

Side Thickness 4mm swaged sides with 7off 140mm x 76mm x 3mm pressed channel uprights

Top rail made from 160 x 80RHS and 150 x 100 Rear Bolster

Top rail to have 75 x 75 x 5 RSA welded

Base:5mm floor with 15 off -140mm x 76mm x 4mm pressed channel cross members

Door:9 Panel door, 4mm with 80mm x 80mm x 3mm RHS frame

Locking is a Ratchet Turnbuckle system with a secondary locking pin, this operates a heavy duty locking mechanism

Door hold back is a Labyrinth Plate with Gravity Catch as standard

4 hinges fitted with grease nipples

Headboard 5mm

Painted: to a standard RAL/BS colour. Customer to specify

ID Marks: welded codes as specified by the customer (Location and code reference) 

Options

Door Seals: Unique profile rubber door seal in steel channel to ensure leak proof container

Door Configuration: Doors can be Single Door (standard) Top Hinged or Double Door arrangements

Logo/Vinyl: as required by the customer, to give clear instructions to the user/consumer.

Colours and logos to be supplied by the customer.

Ladder(s)

HSE directives state ladders are not permitted on containers, as this is impractical, our solution is to put a half height ladder 1.2m below the top rail, this allows the operator to see what’s inside with no danger of falling in
Finish 1.2m from top of container
40mm x 40mm RHS Frame

20mmm dia. solid rungs

Signboards: on either side or ends of the container and/or the door, providing opportunity for company name, logo and phone number or type of waste to be collected


   
   
 



 Product Range