DJE RECYCLING SYSTEMS . SPECIALIST SUPPLIERS . BIOMASS HOOKLIFTS . MATERIAL RECYCLING HOOKLIFT CONTAINERS .  CHAIN LIFT SKIPS . FEL . REL . SKIPS . CONTINENTAL RECYCLING BINS . VEHICLE WEIGHING SOLUTIONS (VWS). EXCAVATOR AND FRONT END LOADER ATTACHMENTS.HARSH SHEETING SYSTEMS. TELEPHONE : 01709-730341:Email:info@djerecyclingsystems .com :

 

«»
1 A HOOKLIFTS
14 MAY RIBBED SWAGED SIDED HOOKLIFT CONTAINERS 15 TO 50 CUBIC YARDS
APRIL 29 2015 SMOOTH SIDED WITH TEXT
APRIL 29 2015 SWAGED SIDE HOOKLIFT CONTAINERS WITH TEXT
APRIL 29 2015 SPECALIST REL FEL

45 Cubic yard Smooth Sided Open Container manufactured with Overlapping Curved Smooth sides, the overlapping plates down the horizontal centre of the sides, along with the curve in the plate, give strength to the construction. Designed for use with light to heavy loads, with unique features which ensures each container is strong and durable, often outlasting customers’ expectations.


Suitable for

Applications and Users
• Cardboard (Pulp, Consumer Waste)
• General Waste
• Paper (Pulp, Consumer Waste)
• Wood (Factory, Pulp or Forest)
Biomass Collection ( Can be supplied with Roof/Lid: Either Hydraulic roof, Rolling roof or enclosed)
• Trade Waste Collection
• Bulk Transportation of light to heavy loads
• Environments
• Industrial applications
• Transfer Stations MRFs

Standard Build

Overlapping Sides: 4mm top plate overlaps the 4mm curved lower plate by 300mm for additional strength. 

• Single door with ratchet locking, secondary locking and unique door hold back
• Heavy duty box section Top Rail for additional strength
• Ramp Plate over Bale Bar
• Internal & External Welded
• Bale Bar captive welded in channel
• Rope/Tie Down point on either side of container
• Cheek Plates in ‘A’ Frame and Bale Bar container
• ‘A’ Frame 180mm x 75mm PFC
• Manufactured to CHEM Standard
• Gusset plates fitted to ‘A’ Frames
• Steel roller fitted with Oilite bushes

Side Thickness: 4mm top plate overlaps the 4mm curved lower plate by 300mm

Top Rails:120mm x 80mm x 5mm RHS top rails

Base: 4mm with 7 off - 140mm x 75mm x 4mm pressed channel cross members

Door: 6 Panel door, 3mm plate with 80mm x 80mm x 3mm RHS frame

45 Yard Container Static Weight: 3323Kgs

Locking is a ratchet turnbuckle system with a secondary locking pin, this operates a
heavy duty locking mechanism

Door hold back is a Labyrinth plate with gravity catch as standard 3 hinges fitted with grease nipples.

Headboard: 4mm plate with 100mm x 100mm RHS Bolster above ‘A’ frame

Paint: Painted to a standard RAL/BS colour. Customer to specify.

ID Marks: Welded codes as specified by the customer (Location and code reference)

Should you require any of the following options please call (01709 730341) or email us .

Finance options are available on all our hooklift containers and Skips which we supply please contact us directly on (01709 730341) this service is not available via our web site enquiry form.

5mm:Floor
5mm:
Lower sides
4mm:
Upper sides
4mm:
Door
Floor Angles

Spreader Bars: Raised or removable Spreader Bar

Door Seals: Unique profile rubber door seal in steel channel to ensure leak proof container

Roof/Lid: Either Hydraulic roof, Rolling roof or enclosed

Door Configuration: Doors can be Single Door (standard) Top Hinged or Double Door arrangements.

Logo/Vinyl: As required by the customer, to give clear instructions to the user/consumer. Colours and logos to be supplied by the customer.

HSE directives state: ladders are not permitted on containers, as this is impractical, our solution is to put a half height ladder 1.2m below the top rail, this allows the operator to see what’s inside with no danger of falling in.

Ladders(s)
Finish 1.2m from top of container
40mm x 40mm RHS frame
20mm dia. rungs
Mounted - offside/nearside/front or rear



 



 Product Range