DJE RECYCLING SYSTEMS . SPECIALIST SUPPLIERS . BIOMASS HOOKLIFTS . MATERIAL RECYCLING HOOKLIFT CONTAINERS .  CHAIN LIFTSKIPS .FEL .REL .SKIPS . CONTINENTAL RECYCLING BINS . VEHICLE WEIGHING SOLUTIONS (VWS). EXCAVATOR AND FRONT END LOADER ATTACHMENTS.HARSH SHEETING SYSTEMS.GURNEY REEVE SUTON SWEEPERS AND ATTACHMENTS .TELEPHONE : 01709 730341:Email:info@djerecyclingsystems .com :

 

«»
2 WHD
3 WHD
APRIL 29 2015 SWAGED SIDE HOOKLIFT CONTAINERS WITH TEXT
APRIL 22 2015 HOOKLIFT RANGE
JUNE 30 SALES SPECIAL 2

BULK CONTAINERS.

We can offer many variants from our lightweight and utility suitable for light to general waste, to our Heavy Duty best suited for metals and rubble. Open top or enclosed with many enclosure options including Hydraulic Roof/Rolling Roof or fixed domed roofs. With sizes ranging from 30 CUYD to 55CUYD and a choice of smooth sided or swaged sides we are sure to have any containers you need for all your waste needs. If you can’t find what you need below contact us today to discuss our bespoke design service.

Heavy Duty Swaged Bulk Containers 30 – 55 Cubic Yards

Suitable for the roughest of materials including rubble/rocks/concrete and metals these are ideal for building sites/demolition facilities and metal recycling plants.

With swaged sides and 7 uprights for additional strength and rigidity this comes as standard with 4mm plate sides, 5mm headboard and 5mm floor with 15 off -140mm x 76mm x 4mm pressed channel cross members, 9-panel door – 4mm with 80mm x 80mm x 3mm RHS frame.

Fitted with 120mm x 80mm x 5mm RHS top rails and 180mm x 75mm PFC ‘A’ Frame with a captive bale bar a welded in channel. Complete with ratchet locking and steel rollers with a solid metal shaft fitted with oilite bushes


Standard Swaged Containers 30 – 55 Cubic Yards

Standard swaged container is a prime example, built for use with medium to heavy loads and ideal for cardboard/paper/wood and general waste.

Swaged Containers come as standard with swaged sides and 7 uprights for additional strength and rigidity, this comes as standard with 3mm plate sides, 4mm sides with 7 off – 140mm x 75mm x 4mm pressed channel cross members, 3mm plate – 9-panel door and 4mm plate headboard.

This comes fitted with 120mm x 80mm x 5mm RHS top rails and a 180mm x 75mm PFC ‘A’ Frame with a captive bale bar welded in channel. Complete with ratchet locking and steel rollers with a solid metal shaft fitted with oilite bushes and optional spreader bar.

Smooth Sided Containers 30-55 Cubic Yards

Overlapping Curved Smooth sides, the overlapping plates down the horizontal centre of the sides, along with the curve in the plate, give strength to the construction

Single door with ratchet locking, secondary locking and unique door hold back, Heavy duty box section Top Rail for additional strength, Ramp Plate over Bale Bar Internal & External Welded, Bale Bar captive welded in channel, Rope/Tie Down point on either side of Cheek Plates in ‘A’ Frame and Bale Bar container

 ‘A’ Frame 180mm x 75mm PFC Manufactured to CHEM Standard,Gusset plates fitted to ‘A’ Frames, Steel roller fitted with Oilite bushes,Side Thickness 4mm top plate overlaps the 4mm curved lower plate by 300mm,Top Rails 120mm x 80mm x 5mm RHS top rails, Base 4mm with 7 off - 140mm x 75mm x 4mm pressed channel cross members, Door 6 Panel door, 3mm plate with 80mm x 80mm x 3mm RHS frame, Locking is a ratchet turnbuckle system with a secondary locking pin, this operates a heavy-duty locking mechanism Door hold back is a Labyrinth plate with gravity catch as standard 3 hinges fitted with grease nipples Headboard 4mm plate with 100mm x 100mm RHS Bolster above ‘A’ frame.

Utility Swaged Containers 30 – 50 Cubic Yards

Utility Containers alternative to the standard Swaged Container, the Utility Container may be for you. Built for use with medium loads and ideal for cardboard/paper/wood and general waste. 

 

With swaged sides and 7 uprights for additional strength and rigidity this comes as standard with 3mm plate sides, 4mm plate base with 7 off – 100mm x 50mm x 4mm pressed channel cross members, 3mm plate – 6-panel door and 4mm plate headboard.

Fitted with 80mm x 80mm x 3.2mm RHS top rails and a 180mm x 75mm PFC ‘A’ Frame with a captive bale bar welded in channel. Complete with ratchet locking and steel rollers with a solid metal shaft and optional oilite bushes.
Build Options

Available with Flat Sides rather than Swaged

Option to fit a roof, either hydraulic, fixed curved enclosed or rolling

Unique profile rubber door seal in steel channel to ensure leak proof container.

Doors can be Single Door (standard) Top Hinged or Double Door arrangements






 Product Range