DJE RECYCLING SYSTEMS . SPECIALIST SUPPLIERS . BIOMASS HOOKLIFTS . MATERIAL RECYCLING HOOKLIFT CONTAINERS .  CHAIN LIFT SKIPS . FEL . REL . SKIPS . CONTINENTAL RECYCLING BINS . VEHICLE WEIGHING SOLUTIONS (VWS). EXCAVATOR AND FRONT END LOADER ATTACHMENTS.HARSH SHEETING SYSTEMS. TELEPHONE : 01709-730341:Email:info@djerecyclingsystems .com :

 

«»
APRIL 21 SKIPS REL AND FEL
APRIL 29 2015 BUILD OPTIONS HOOKLIFTS
11 APRIL TAYLOR CONTINENTAL RANGE FRONT PAGE BANNER
HL5 HOOKLIFTS 7-20 CUBIC YARDS
13 MAY 2015 SELLERS HOOKLIFT RANGE



We can offer many variants of Flat Sided Hooklift Skip Containers for general waste, to our Heavy Duty best suited for metals and rubble. Open top or enclosed with many enclosure options including Hydraulic Roof/Rolling Roof or fixed domed roofs. With sizes ranging from 15CUYD to 55CUYD for all your waste needs. If you can't find what you need below contact us today to discuss our bespoke design service.

Summary Designed for use with medium to heavy loads, with unique features which ensures each container is strong and durable.

Flat sides

7 uprights for additional strength

Single door with ratchet locking, secondary locking and unique door hold back

Heavy duty box section Top Rail for additional strength

Standard Build

Ramp Plate over Bale Bar

Bale Bar captive welded in channel

Cheek Plates in ‘A’ Frame and Bale Bar
 ‘A’ Frame 180mm x 75mm PFC

Gusset plates fitted to ‘A’ Frames

Steel roller fitted with Oilite bushes

Internal & External Welded

Rope/Tie Down point on either side of skip container

Spreader Bar 80mm x 80mm RHS
Manufactured to CHEM Standard

Side Thickness 3mm,
Top Rails 120mm x 80mm x 5mm RHS top rails

Base 4mm or with 7 off - 140mm x 75mm x 4mm pressed channel cross members

Door 3mm plate

Locking is a ratchet turnbuckle system with a secondary locking pin, this operates a heavy-duty locking mechanism

Door hold back is a Labyrinth plate with gravity catch as standard

3 hinges fitted with grease nipples

Headboard 3mm plate with 80mm x 80mm RHS frame and 100mm x 100mm RHS Bolster

Painted to a standard RAL/BS colour. Customer to specify.

ID Marks Welded codes as specified by the customer (Location and code reference)

Should you require any of the following options please call (01709 730451) or email us info@djerecyclingsystems.com

Side Thickness 4mm or 5mm,
Top Rails 120mm x 80mm x 5mm RHS top rails

Base 5mm or 6mm with 7 off - 150mm x 100mm x 5mm pressed channel cross members

Headboard 4mm or 5mm plate

Door 4mm or 5mm plate

Spreader Bars, Removable Spreader Bar

Door Seals Unique profile rubber door seal in steel channel to ensure leak proof container

To have the swaged side rather than flat sides

Roof/Lid Either Hydraulic roof, Rolling roof or enclosed

Door Configuration. Doors can be Single Door (standard) Top Hinged or Double Door arrangements

Logo/Vinyl As required by the customer, to give clear instructions to the user/consumer. Colours

and logos to be supplied by the customer.

Ladder(s) Finish 1.2m from top of container

40mm x 40mm RHS Frame

20mmm diameter. solid rungs

Signboards  On either side of the container and/or the door, providing opportunity for company name, logo and phone number or type of waste to be collected

 

 You might also be interested in our range of Flat Sided Nesting Hooklift Containers 


Flat Sided Nesting Hooklifts are designed to allow for the transportation of two heavy duty containers whilst only occupying the footprint of one – saving money on not only initial delivery costs, but day-to-day operational costs usually incurred when delivering and collecting large containers.

With a combined volume of 44cuyd, these containers meet all the same rigorous standards we apply to our standard Hooklift Containers whilst offering the ability to nest the smaller 18cuyd container within the larger 26cuyd. This inventive design, principles maximise internal space, allowing the nesting of smaller containers.




 Product Range