Logging Flat Bed Hooklifts
MPFB: Logging Flatbed Hooklift 6.34 meter is fitted with removable bolsters it can also be used to carry plant and other equipment by simply removing the bolsters.
Design to carry logs and trees there are 5 removable bolsters each side.
Optional: Removable Tool Carrier Boxes (Shown on Image)
Standard Build
12 Rope Hooks Each Side
5 Heavy Duty Lashing Rings Each Side
4 Rope Hooks on Top Of Bolster
6mm Durbar plate deck
10 floor cross members supporting the deck plate
Captive welded Bale Bar to ensure continued strength of repeated lifting
Hinged rear tailgate which is spring loaded and balanced to fall down to be used as a loading ramp.
Ramp Plate over Bale Bar
Bale Bar captive welded in channel
Cheek Plates in ‘A’ Frame and Bale Bar
230mm x 75mm PFC longitudinal runners
180mm x 75mm PFC ‘A’ frame
Gusset plates fitted to ‘A’ Frames
Steel rollers fitted with ‘Oilite’ Brushes
Manufactured to CHEM Standard
Deck: 6mm Durbar chequer plate floor
Rear Tailgate: 4mm Durbar plate with 100 x 50 RSC frame. Supported by two ramp springs and held in place by ramp fasteners. Unfastening the ramp fasteners allows the tailgate to be lowered to form the ramp
Headboard: 4mm plate with 100mm x 50mm RSC frame and 100mm x 100mm RHS Bolster
Paint: Painted to a standard RAL/BS colour. Customer to specify
ID Marks: Welded codes as specified by the customer (Location and code reference)