DJE RECYCLING SYSTEMS . SPECIALIST SUPPLIERS . BIOMASS HOOKLIFTS . MATERIAL RECYCLING HOOKLIFT CONTAINERS .  CHAIN LIFT SKIPS . FEL . REL . SKIPS . CONTINENTAL RECYCLING BINS . VEHICLE WEIGHING SOLUTIONS (VWS). EXCAVATOR AND FRONT END LOADER ATTACHMENTS.HARSH SHEETING SYSTEMS. TELEPHONE : 01709-730341:Email:info@djerecyclingsystems .com :

 

«»
1 WHD
2 WHD
3 WHD
4 WHD
5 WHD



DJE Recycling Systems offer 5 HDW Hooklift Containers build options from 30 Cubic yards to 55 Cubic yards, for recycling businesses and recyclers that operate machinery in both waste transfer stations and CA Civic Amenities Sites.

HDW Waste Spec Container has been specially designed for recycling businesses that operate machinery including loading shovels, excavators fitted with waste grab or compaction wheel / tamper.



 

Designed for use, where heavy items are contained for transport, with unique features to ensures each container is extremely strong, durable and long lasting, to withstand the frequent and daily loading and unloading by recycling machinery  working within inhospitable environments.

Swaged sides for rigidity

8 uprights for additional strength

15 floor cross members: to take the impact of heavy items being constantly loaded or compacted

Captive welded Bale Bar to ensure continued strength of repeated lifting

Top Rails: 160 x 80 x 5 RHS Top Rails 75 x 75 RSA Fitted to top rail and inside face

Ramp Plate over Bale Bar

Bale Bar captive welded in channel

Cheek Plates in ‘A’ Frame and Bale Bar

‘A’ Frame 180mm x 75mm PFC

Gusset plates fitted to ‘A’ Frames

Steel roller fitted with ‘Oilite’ Brushes

Internal & External Welded seams

Rope/Tie Down point on either side of container

Spreader Bar: Flush Mounted

Manufactured to CHEM Standard

Side Thickness 4mm swaged with 7off 140mm x 76mm x 3mm pressed channel uprights

Top Rails: Top rail made from 160 x 80RHS and 150 x 100 Rear Bolster

Base 5mm with 15 off -140mm x 76mm x 4mm pressed channel cross members.

Door: 9 Panel door, 4mm with 80mm x 80mm x 3mm RHS frame

Single door with ratchet locking, secondary locking and unique door hold back

Locking is a Ratchet Turnbuckle system with a secondary locking pin this operates a heavy duty locking mechanism.

Door hold back is a Labyrinth Plate with Gravity Catch as standard

4 hinges fitted with grease nipples

Headboard: 5mm plate with 80mm x 80mm RHS frame and 100mm x 100mm RHS Bolster

Paint Painted to a standard RAL/BS colour. Customer to specify

ID Marks: Welded codes as specified by the customer (Location and code reference)