Continental 1280 litre 1100 Litre 820 Litre Fork Pockets (Internal)

Adding fork pockets to your Continental containers allows for the safe and easy movement of containers around large sites. For operators with heavier waste requirements and the standard use of forklift trucks this simple enhancement can speed up waste transportation and allow for more effective waste collection points on site.

Adding Internal Fork Pockets to our Continental Containers ensures easy movement of the containers around the site. This versatile container can be adapted to meet your requirements.

Suitable for forklift trucks fitted with bin rotator for emptying into Hooklift Roll on Roll Off container, Chain lift Skips,

The 820L 1100L 1280L can be supplied without a lid suitable for working on production lines for recycling materials
  

The Continental 1280L - 1100L - 820L fitted with Internal Fork Pockets is EN840 compliant and will give you exceptional lifetime value with limited downtime, unlike plastic and other alternative steel commercial trade bins.

steel body, Hot-Dipped Galvanised Steel along with internally welded seams, ensures robust protection in the harshest of environments and protects the container from internal corrosion due to residual waste being caught in exposed corners.Internally welded seams stop water penetration, preventing the corrosion that plagues less well-made metal waste containers. With full EN840 certification, they will give you exceptional lifetime value with limited downtime, unlike plastic and other alternative steel commercial trade waste bins. Internally welded seams stop water penetration, preventing the corrosion that plagues less well-made metal waste containers.

Benefits Heavy-Duty Base Rotate Emptying Available as:

Narrow Internal Fork Pockets

Wide Internal Fork Pockets

All four castors are 200mm steel-centred rubber-tyred swivel castors, two of which are fitted with trailing brakes (Brakes are press to lock, press to release)

1280L - 1100L - 820L Containers Can Be Fitted With Internal Fork Pockets Option 

 
Advantages Powder Coating: Taylor Continental Bin,The container is powder-coated option using polyester powder, which is baked and cured in a controlled oven process Providing a layer of protection against corrosion, scratches/chipping and fading, Being one of the most long-lasting superior paint finishes, and colour-durable quality finishes. Which is then baked on through the High-Temperature Conveyor Drying System. Unlike a wet paint finish.

All four castors are 200mm steel-centred rubber-tyred swivel castors, two of which are fitted with trailing brakes (Brakes are press to lock, press to release)

Also available with Heavy Duty Towing Castor
Continental Towing containers are fully adapted and built with a heavy-duty reinforced base and heavy-duty Power castors and removable tow link system allowing up to 4 wheeled containers to be moved at a time subject to bin size and materials, ground conditions and material weights.
Taylor Towing Containers provides a safe, practical answer to all towing requirements. Any container which is to be towed should be fitted with heavy-duty Power Towing castors or two swivel castors complete with directional locks, at one end of the container and that no more than four containers are towed at any one time Please note we would not recommend using standard castors for towing up to 4 bins

Bin Castors Options
    

Lids are Rotary-molded double skin plastic with a minimum weight of 5.0 kilo manufactured in an aluminium mould for superior finish 15 Standard Colour Options.

 The Continental Galvanised Steel 1280L 1100L 820L Recycling Bin is suitable for use with static waste compactors fitted with internal fork pockets, and DIN Lift points suitable for use with static waste compactors fitted with either a comb or DIN Lift Points as standard. Fitted with a heavy-duty base.



For Further Information on the Taylor:1280L – 1100L - 820L Fitted With Internal Fork Pockets: Please Phone DJE On: 01709-730341 Or Via the Contact Form

660 litre – 1280 Litre Bins Standard Build Compliances

• Comb lifting bar (Frontal receiver) to meet EN840-2 regulation
• Simple, robust steel hinge bar secured by a split pin
• The double skinned rotationally moulded lid is both durable and UV resistant. Available in a choice of colours
• The lid recovers even from extensive deformation unlike injection moulded plastic lids
• The design avoids water draining into the bin, unlike some alternatives
• Handles designed to EN 840 for ergonomic handling and health & safety by keeping hands away from lifting gear
• The continental bins comply with EN840 standard whereas flat based bins fall short of this compliancy
• Standard Build Compliances
• Double tank method as dictated by European Standard BS EN 840
• Quality Control Certification to BS EN ISO 9001:2000
• Bin comply in full with European Standard BS EN 840
• Certification to Environmental Standard BS EN ISO 14001
• Recycling bins comply in full with ‘The Noise and Emission in the Environment by Equipment for use Outdoors Regulation 2001’. BSENISO3744:1985
• Hot-dip galvanised to meet BS EN 1461: 2009
• Bin body steel, all joints fully welded with all internal body seams continuously welded. All steel parts are galvanised after manufacture to meet BS 729.
• Galvanised steel body with internal fully welded seams
• Castors Compliant with EN840
• The patented top frame is an unbroken pressed steel tube designed to give maximum rigidity to the container during lifts for a longer life span.
• The patented comb bar is Rolled section tube with a step profile to ensure maximum rigidity and safe and efficient fit on vehicle lifts. The lifting bar must integrate with all refuse collection vehicles meeting the specification in the European Standard EN 15.