DJE RECYCLING SYSTEMS. SPECIALIST SUPPLIERS. BIOMASS.BIOWASTE. HOOKLIFTS. MATERIAL RECYCLING HOOKLIFT CONTAINERS.CONTINENTAL RECYCLING BINS.TELEPHONE: 01709 730341:Email:info@djerecyclingsystems.com:

 

Taylor 700 Bin

Continental 700L, metal bin 700-litre waste container is ideal for your medium to large collection needs where space is limited, which is suitable for towing. With the same footprint as our 660 container, the addition of a sump base creates extra storage capacity whilst offering exceptional towing stability due to its specialised design. The 700 waste container as with all the Continental 700L  is fully EN840 certified ensuring superb quality and safety. The 700 is ideal for narrow access and towing.

700L Waste Disposal 4-Wheel Metal Bin

Taylor Continental 700 litre, Waste Disposal Steel Bin Hot-Dipped Galvanised Steel along with internally welded seams, ensures robust protection in the harshest of environments and protects the container from internal corrosion due to residual waste being caught in exposed corners. Internally welded seams stop water penetration.
Highly Durable Galvanised Steel Body

Galvanised Steel Body, hot-dipped galvanised steel along with fully internally welded seams, ensures robust protection in the harshest of environments and protects the container from internal corrosion due to residual waste being caught in exposed corners.

Internally welded seams stop water penetration, preventing the corrosion that plagues less well-made metal waste containers. With full EN840 certification, they will give you exceptional lifetime value with limited downtime.
Steel-centred castor wheels manufactured with needle bearings, grease and rubber optimised for performance (we don’t offer plastic-centred castors)

Fully Internally welded seams prevent internal corrosion, whilst the hard-wearing galvanized steel body and base make for a durable, long-lasting container that delivers exceptional lifetime value.

 

 

The key benefits to owning continental recycling bins are they are completely durable, low maintenance, fire containment, long life, vandal proof and low cost of ownership compared to similar bins.

Galvanised Steel Panels Front, Rear and Side Panels are constructed from 1.5mm Mild Steel Swages are between 2 to 7mm and panels have a bowed-out geometry to spring out under heavy loads.

The top frame is a complete welded tube, not split or open bend, with a diameter of 20mm. The use of the complete welded tube is very important here, as by using a complete tube there are no holes or gaps in which waste can leak into the top frame itself when the container is lifted on emptying.

The Comb Bar is manufactured from a single piece of steel with welded end pieces and gussets.

All four castors are 200mm steel-centred rubber-tyred swivel castors, two of which are fitted with trailing brakes (Brakes are press to lock, press to release)

All four castors are 200mm Steel centred wheels are manufactured with needle bearings, grease and rubber optimised for performance steel-centred rubber-tyred swivel castors, two of which are fitted with trailing brakes (Brakes are press to lock, press to release) are bolted on for an easy replacement. Two-foot operated, trailing braking wheels at the front with two swivel wheels at the back. (Not Welded On or Plastic Centred Castors)

Also available with Castors Options
    

None marking castors are mainly used by Airports and Hotel lobbies, Schools, Hospitals, Offices, and Shopping Centres, which have none, marking floor Vinyl, Epoxy, and Laminate Floor covering.

Continental Towing containers are fully adapted and built with a heavy-duty reinforced base and heavy-duty Power castors and removable tow link system allowing up to 4 wheeled containers to be moved at a time subject to bin size and materials, ground conditions and material weights.

Bin Towing Containers provides a safe, practical answer to all towing requirements. Any container which is to be towed should be fitted with heavy-duty Power Towing castors or two swivel castors complete with directional locks, at one end of the container and that no more than four containers are towed at any one time.

Heavy Duty Power Towing Castors  2 Swivel 2 Directional Lock is designed for towing up to 4 bins also the base is a heavy-duty build 

Please note we would not recommend using standard castors standard bin base for towing bins

Please contact us on 01709 730341 if you need more information on “Towing Guidelines” or Castor Options and technical advice.

Available with either a drop front or drop back panel
Continental Drop Front and Drop Back containers have been created to help avoid the health and safety risks associated with handballing bagged or bulky waste, often an important requirement within retail and manufacturing environments or easy emptying mainly used by charity shops,

Advantages Powder Coating: Taylor Continental Bin,
Powder Coating is a drying process created by an electric charge that causes a dry powder to fuse to the surface of the galvanised steel bin. Providing a layer of protection against corrosion, scratches/chipping, and fading, Is one of the most long-lasting superior paint finishes, and colour-durable quality finishes. Which is then baked on through the High-Temperature Conveyor Drying System. Unlike a wet paint finish.

Different Lid Types & Apertures

Lids are Rotary-molded double-skin plastic with a minimum weight of 5.0 kilos manufactured in an aluminium mould for a superior finish 15 Standard Colour Options.

Standard Trade Lid: The innovative rotary moulded, the double-skinned lid is waterproof and extra strong. The lid lock plug can be removed for easy post-fitting of a lid lock.

Available in a range of colours.

Flap Lid: Designed for paper or plastics recycling. The flap opening lid is available in a wide choice of colours from our range.

Brush Lid: This two-aperture brush entry port bottle lid is ideal for glass, cans and plastics recycling. Available in a wide choice of colours from our range.

Bespoke Logos Can Be Applied To Any Bin showing what can be correctly recycled
Logo Options

Effective use of a logo alongside an eye-catching paint scheme is a key aspect in the design of your bin and can convey a powerful brand image or message regarding container use. Personalise your containers with a complete range of Wrap logos or by adding bespoke logos,

For Further Information on the 700 Litre General Waste Bin: Please Phone DJE On: 01709-730341 Or Via the Contact Form.

Technical Specifications
Capacity: 700 litres

Castors: 200mm or 160mm
Depth: 720mm
Empty Weight: 85kg
Height: 1320mm
Width: 1250mm
SWL: 264KG

Options
160mm castors, DIN points, Custom embossing, Central locking castors, Drop front / drop back panel, Towing capabilities, Drain plug options, Different lid types & apertures, Variety of lid colours

700 Litre Bin Dimensions 

Bin Compliances:  

  • Double tank method as dictated by European Standard BS EN 840  
  • Quality Control Certification to BS EN ISO 9001:2000
  • Bin comply in full with European Standard BS EN 840
  • Certification to Environmental Standard BS EN ISO 14001
  • Recycling bins comply in full with ‘The Noise and Emission in the Environment by Equipment for use Outdoors Regulation 2001’. BSENISO3744:1985 
  • Hot-dip galvanised to meet BS EN 1461: 2009
  • Bin body steel, all joints fully welded with all internal body seams continuously welded. All steel parts are galvanised after manufacture to meet BS 729.
  • Galvanised steel body with internal fully welded seams
  • Castors Compliant with EN840

 


   Trade Bins
General Waste
Quick Links







Recycling Bins
Mixed Dry Recyclables 






Bottle Recycling Bins