DJE RECYCLING SYSTEMS. SPECIALIST SUPPLIERS.TAYLOR 4 WHEEL GALVANISED STEEL METAL BINS: 46 BUILD VARIANTS, UN APPROVED CLINICAL WASTE BINS, TRADE WASTE BINS, BOTTLE RECYCLING BINS, GENERAL WASTE BINS, FOOD WASTE RECYCLING BINS, CHAMBERLAIN WASTE BINS, DOMESTIC WASTE BINS, GREEN WASTE RECYCLING  BINS, PAPER RECYCLING BINS, PLASTIC RECYCLING BINS, WEEE BIN, DUO SPLIT BIN, DROP FRONT or DROP BACK PANEL BINS, HIGH-SPEED TOWING BINS, INTERNAL FORK POCKETS, EXTERNAL FORK POCKETS, FOOT OPERATED LID OPTION, TAYLOR GALVANISED STEEL 4 WHEEL BINS, TRADE WASTE, RECYCLING BINS, DURAFLEX LIDS, TRADE LIDS, HIGH DOME RECYCLING FLAP LIDS, 2 APERTURE BOTTLE RECYCLING LIDS,3 LID LOCK OPTIONS, STANDARD HANDLES, DANISH HANDLES,200mm STEEL CENTRED BOLT ON CASTORS,4 OPTIONS, TELEPHONE:01709 730341 :Email:info@djerecyclingsystems.com:

«»
10 METAL 1 1280 CLINICAL
10 METAL 2 1100 UN CLINICAL WASTE
10 METAL 3 820 CLINICAL
10 METAL 4 770 CLINICAL
10 METAL 5 660 CLININICAL



Taylor 820 Litre Clinical Bins are built to meet the Stringent  UN approved* 4 wheeled clinical waste Standards. Fitted with a steel galvanised body, internally welded seams and drop-resistant castors. Creating the ultimate medical waste container provides you with a large-capacity solution for clinical waste from hospitals, surgeries care homes and clinics. Required by many recycling companies and hospital authorities for the safety and well-being of their staff. All UN Continental Clinical Waste Bins are built to meet the Stringent Standards With a steel galvanised body, internally welded seams and drop-resistant castors, a Yellow lid, and a Standard V Bin Lid lock. 


820L Galvanised Steel is fully internally welded seams, ensures robust protection in the harshest of environments, and protects the container from internal corrosion due to residual waste being caught in exposed corners. Internally welded seams stop water penetration.

  • 820L Galvanised Steel Body, hot-dipped galvanised steel along with fully internally welded seams, ensures robust protection in the harshest of environments and protects the container from internal corrosion due to residual waste being caught in exposed corners.
    Steel Panels Front, Rear and Side Panels are constructed from 1.5mm Mild Steel Swages are between 2 to 7mm and panels have a bowed-out geometry to spring out under heavy loads
  • The container can be powder-coated option using polyester powder, which is baked and cured in a controlled oven process providing a layer of protection against corrosion, scratches/chipping and fading, being one of the most long-lasting superior paint finishes, and colour-durable quality available in 12 standard colours
  • The Comb Bar is manufactured from a single piece of steel with welded end pieces and gussets.
  • The top frame is a complete welded tube, not split or open bend, with a diameter of 20mm. The use of the complete welded tube is very important here, as by using a complete tube there are no holes or gaps in which waste can leak into the top frame itself when the container is lifted on emptying
  • Container Bin Lids are Rotary-moulded double skin plastic with a minimum weight of 5.0 kilo manufactured in an aluminum mould for superior finish 12 Standard Colour Options.
  • Container Bin Lid Options
  • Standard Trade Lid
  • 2 Aperture Bottle Brush Lid
  • Recycling Flap Lid
  • Bolt on Castor Options for easy replacement
  • Standard 200mm Steel Centred Castors
  • Heavy Duty 200m Castors
  • 200mm High Speed Towing Castors Heavy Duty Power Towing Castors 2 Swivel 2 Directional Lock is designed for towing up to 4 bins also the base is heavy-duty built and fitted with bolt on hitch and towing eye.
  • None Marking 200mm Castors also available with none marking towing castors.


Galvanised Steel Body, hot-dipped galvanised steel along with fully internally welded seams, ensures robust protection in the harshest of environments and protects the container from internal corrosion due to residual waste being caught in exposed corners.

Internally welded seams stop water penetration, preventing the corrosion that plagues less well-made metal waste containers. With full EN840 certification, 820 will give you exceptional lifetime value with limited downtime.

Steel-centred castor wheels manufactured with needle bearings, grease and rubber optimised for performance (we don’t offer plastic-centred castors)

Fully Internally welded seams prevent internal corrosion, whilst the hard-wearing galvanized steel body and base make for a durable, long-lasting container that delivers exceptional lifetime value.

The key benefits to owning continental clinical waste bins are they are completely durable, low maintenance, fire containment, long life, vandal proof and low cost of ownership compared to similar bins.

The top frame is a complete welded tube, not split or open bend, with a diameter of 20mm. The use of the complete welded tube is very important here, as by using a complete tube there are no holes or gaps in which waste can leak into the top frame itself when the container is lifted on emptying.
The Comb Bar is manufactured from a single piece of steel with welded end pieces and gussets.

Clinical Standard Yellow Lid
The innovative rotary moulded, double-skinned lid is waterproof and extra strong. Lids are Rotary-molded double-skin plastic with a minimum weight of 5.0 kilos manufactured in an aluminium mould for a superior finish

The handles are placed in the optimal areas for ergonomics and manoeuvrability of the containers, whilst still retaining a safe distance from any moving parts on the refuse truck.

The castors fitted to the bins are tested for both strength and rolling resistance to ensure you get a long life from the bin, yet the bin is still compliant with all health and safety recommendations for manoeuvring wheeled objects.

Key product features:
Comb lifting bar (Frontal receiver) to meet EN840-2 regulation
Simple, robust steel hinge bar secured by a split pin
The double-skinned rotationally moulded lid is both durable and UV resistant. 
The lid recovers even from extensive deformation unlike injection moulded plastic lids
The design avoids water draining into the bin, unlike some alternatives
Handles designed to EN 840 for ergonomic handling and health & safety by keeping hands away from lifting gear

The continental clinical  bins is a true 820-litre capacity complying with  EN840 standard whereas flat-based bins fall short of this compliancy

Steel-centred wheels manufactured with needle bearings, grease, and rubber optimised for performance.

Two foot operated, trailing braking wheels at the front with two swivel wheels at the back.

Draw depth and shape of pressings optimised to avoid buckling or distortion of bin on impact or lifting when fully laden.

Please Phone DJE on 01709-730341 for further information or via the contact form


820 Litre Bin Dimensions 


Bin Compliances: 
 

  • Double tank method as dictated by European Standard BS EN 840  
  • Quality Control Certification to BS EN ISO 9001:2000
  • Bin comply in full with European Standard BS EN 840
  • Certification to Environmental Standard BS EN ISO 14001
  • Recycling bins comply in full with ‘The Noise and Emission in the Environment by Equipment for use Outdoors Regulation 2001’. BSENISO3744:1985 
  • Hot-dip galvanised to meet BS EN 1461: 2009
  • Bin body steel, all joints fully welded with all internal body seams continuously welded. All steel parts are galvanised after manufacture to meet BS 729.
  • Galvanised steel body with internal fully welded seams

 


General Waste Bins
Dimensions



Width 1244mm
Depth 1057mm
Height 1363 mm


Width 1260mm
Depth 1000mm
Height 1382mm


Width 1280mm
Depth 785mm
Height 1360mm

Width 1270mm
Depth 790mm

Height 1382mm

Width 1250mm
Depth 720mm
Height 1320mm
Will Fit Through Any Standard

Width Door Way

Width 1270mm
Depth 720mm
Height 1340mm
Will Fit Through Any Standard
Width Door Way


Width 1290mm
Depth 720mm
Height 1095mm
Will Fit Any Through Any Standard
Width Door Way


Width 1020mm
Depth 920mm
Height 1500mm

Width 1020mm
Depth 770mm
Height 1410mm