The Mk4 660 Drop Front Drop Back Panel Bin 4 Wheel Steel Bin has a deceptively large capacity in a small footprint. Its slim configuration allows it to fit through a standard doorway, making it ideal for indoor storage or secure collection areas also can be supplied with a recycling flap lid.
Continental 660 - 4 Wheel Metal bin is available with either a Drop Front or Drop Back suitable panel handballing bagged or bulky waste, often an essential requirement within retail and manufacturing environments
660 Drop Back comes standard with a comb bar, Please note a drop front panel bin isn’t fitted with a comb bar Drop Back Panel bin the lid is hinged at the front of the bin. Drop Front Panel bin The lid is hinged at the back of the bin.
Continental 660 litre, Drop Front Drop Back Panel, Waste Disposal Steel Bin Hot-Dipped Galvanised Steel along with internally welded seams, ensures robust protection in the harshest of environments and protects the container from internal corrosion due to residual waste being caught in exposed corners. Internally welded seams stop water penetration.
Highly Durable Galvanised Steel Body
Galvanised Steel Body, hot-dipped galvanised steel along with fully internally welded seams, ensures robust protection in the harshest of environments and protects the container from internal corrosion due to residual waste being caught in exposed corners.
Internally welded seams stop water penetration, preventing the corrosion that plagues less well-made metal waste containers. With full EN840 certification, they will give you exceptional lifetime value with limited downtime.
Steel-centred castor wheels manufactured with needle bearings, grease and rubber optimised for performance (we don’t offer plastic-centred castors)
Fully Internally welded seams prevent internal corrosion, whilst the hard-wearing galvanized steel body and base make for a durable, long-lasting container that delivers exceptional lifetime value.
The key benefits to owning 660L Drop Front / Drop Back Panel continental recycling bins are they are completely durable, low maintenance, fire containment, long life, vandal proof and low cost of ownership compared to similar bins.
Galvanised Steel Panels Front, Rear and Side Panels are constructed from 1.5mm Mild Steel Swages between 2 to 7mm and panels have a bowed-out geometry to spring out under heavy loads.
The top frame is a complete welded tube, not split or open bend, with a diameter of 20mm. The complete welded tube is very important here, as by using a complete tube there are no holes or gaps in which waste can leak into the top frame itself when the container is lifted on emptying but not available on a drop front panel bin. (Not fitted to a drop front panel bin)
The Comb Bar is manufactured from a single piece of steel with welded end pieces and gussets. not available on a 660-litre drop front panel bin. (Only Fitted To Drop Back Panel Bin)
660 steel body, Hot-Dipped Galvanised Steel along with internally welded seams, ensures robust protection in the harshest of environments and protects the container from internal corrosion due to residual waste being caught in exposed corners. plagues less well-made metal waste containers. With full EN840 certification, they will give you exceptional lifetime value with limited downtime, unlike plastic and other alternative steel commercial trade waste bins.
Internally welded seams stop water penetration, preventing corrosion.
All four castors are160mm steel-centred rubber-tyred swivel castors, two of which are fitted with trailing brakes (Brakes are press to lock, press to release)
All four castors are Steel centred wheels manufactured with needle bearings, grease and rubber optimised for performance steel centred rubber-tyred swivel castors, two of which are fitted with trailing brakes (Brakes are press to lock, press to release) are bolted on for an easy replacement. It is two-foot-operated, with trailing braking wheels at the front and two swivel wheels at the back. (Not Welded On or Plastic Centred Castors)
Also available with Castors Options
None marking castors are mainly used by Airports and Hotel lobbies, Schools, Hospitals, Offices, and Shopping Centres, which have no, marking floor Vinyl, Epoxy, or Laminate Floor covering.
660 Trade Lid
660 Recycling Flap Lid
Lids are Rotary-molded double-skin plastic with a minimum weight of 5.0 kilos manufactured in an aluminium mould for a superior finish.
Flap Lid
Designed for paper or plastics recycling. The flap opening lid is available in a choice of 12 colours
Advantages Powder Coating: Continental Bin,
The container can be powder powder-coated option using polyester powder, which is baked and cured in a controlled oven process Providing a layer of protection against corrosion, scratches/chipping and fading, Being one of the most long-lasting superior paint finishes, and has colour-durable quality finish,
For Further Information and a full quotation on the 660 Litre Drop Front – Drop Back Panel Waste Bin: Please Phone DJE On 01709-730341 Or Via the Contact Form or email: info@djerecyclingsystems.com
Dimensions 660L Drop Front
Bin Compliances:
Web Page Disclaimer: (All Images and Colour Charts are for guild line purposes)