DJE RECYCLING SYSTEMS. SPECIALIST SUPPLIERS.TAYLOR 4 WHEEL GALVANISED STEEL METAL BINS: 46 BUILD VARIANTS, UN APPROVED CLINICAL WASTE BINS, TRADE WASTE BINS, BOTTLE RECYCLING BINS, GENERAL WASTE BINS, FOOD WASTE RECYCLING BINS, CHAMBERLAIN WASTE BINS, DOMESTIC WASTE BINS, GREEN WASTE RECYCLING  BINS, PAPER RECYCLING BINS, PLASTIC RECYCLING BINS, WEEE BIN, DUO SPLIT BIN, DROP FRONT or DROP BACK PANEL BINS, HIGH-SPEED TOWING BINS, INTERNAL FORK POCKETS, EXTERNAL FORK POCKETS, FOOT OPERATED LID OPTION, TAYLOR GALVANISED STEEL 4 WHEEL BINS, TRADE WASTE, RECYCLING BINS, DURAFLEX LIDS, TRADE LIDS, HIGH DOME RECYCLING FLAP LIDS, 2 APERTURE BOTTLE RECYCLING LIDS,3 LID LOCK OPTIONS, STANDARD HANDLES, DANISH HANDLES,200mm STEEL CENTRED BOLT ON CASTORS,4 OPTIONS, TELEPHONE:01709 730341 :Email:info@djerecyclingsystems.com:

«»
1 METAL 1 1280 TRADE BIN
2 METAL 1 TRADE BIN
3 METAL 1 820 TRADE BIN
4 METAL 1 770 TRADE BIN
6 METAL 1 660 TRADE BIN


The Taylor Range General Waste Bins are the industry-leading standard for waste and recycling containers regardless of the market sector. The Continental range is available in an unrivalled number of sizes from 500 to 1280 litres.
      

  • Galvanised Steel Body, hot-dipped galvanised steel along with fully internally welded seams, ensures robust protection in the harshest of environments and protects the container from internal corrosion due to residual waste being caught in exposed corners.

    Steel Panels Front, Rear and Side Panels are constructed from 1.5mm Mild Steel Swages are between 2 to 7mm and panels have a bowed out geometry to spring out under heavy loads

  • The container can be powder-coated option using polyester powder, which is baked and cured in a controlled oven process providing a layer of protection against corrosion, scratches/chipping and fading, being one of the most long-lasting superior paint finishes, and colour-durable quality available in 12 standard colours
  • The Comb Bar is manufactured from a single piece of steel with welded end pieces and gussets.

  • The top frame is a complete welded tube, not split or open bend, with a diameter of 20mm. The use of the complete welded tube is very important here, as by using a complete tube there are no holes or gaps in which waste can leak into the top frame itself when the container is lifted on emptying

  • Container Bin Lids are Rotary-moulded double skin plastic with a minimum weight of 5.0 kilo manufactured in an aluminium mould for superior finish 12 Standard Colour Options.

  • Container Bin Lid Options
  • Standard Trade Lid
  • 2 Aperture Bottle Brush Lid
  • Recycling Flap Lid
  • Bolt on Castor Options for easy replacement
  • Standard 200mm Steel Centred Castors
  • Heavy Duty 200m Castors
  • 200mm High Speed Towing Castors
  • None Marking 200mm Castors


Galvanised Steel Panels Front, Rear, and Side Panels are constructed from 1.5mm Mild Steel between 2 to 7mm, and panels have a bowed-out geometry to spring out under heavy loads.

The top frame is a complete welded tube, not split or open bend, with a diameter of 20mm. The complete welded tube is significant here, as by using a complete tube there are no holes or gaps in which waste can leak into the top frame itself when the container is lifted on emptying.
A steel body, Hot-Dipped Galvanised Steel along with internally welded seams, ensures robust protection in the harshest of environments and protects the container from internal corrosion due to residual waste being caught in exposed corners.
Internally welded seams stop water penetration, preventing the corrosion that plagues less well-made metal waste containers. With full EN840 certification, they will give you exceptional lifetime value with limited downtime, unlike plastic and other alternative steel commercial trade waste bins.
Internally welded seams stop water penetration, preventing the corrosion that plagues less well-made metal waste containers.

All four castors are 200mm steel-centered rubber-tyred swivel castors, two of which are fitted with trailing brakes (Brakes are press to lock, press to release)

Also available with Heavy Duty Towing Castors
Continental Towing containers are fully adapted and built with a heavy-duty reinforced base heavy-duty Power castors and a removable tow link system allowing up to 4 wheeled containers to be moved at a time subject to bin size and materials, ground conditions, and material weights.

Bin Towing Containers provide a safe, practical answer to all towing requirements. Any container that is to be towed should be fitted with heavy-duty Power Towing castors or two swivel castors complete with directional locks, at one end of the container and no more than four containers are towed at any one time.
Please note we would not recommend using standard castors for towing up to 4 bins

Advantages Powder Coating: Taylor Continental Bin,
The container is powder coated option using polyester powder, which is baked and cured in a controlled oven process Providing a layer of protection against corrosion, scratches/chipping and fading, Being one of the most long-lasting superior paint finishes, and colour-durable quality finishes, 

Lids are Rotary-molded double-skin plastic with a minimum weight of 5.0 kilos manufactured in an aluminium mould for a superior finish with 12 Standard Colour Options.

DuraFlex lids are up to 4 times lighter than metal lids, thereby considerably reducing the risk of accidents to waste operatives and members of the public.
DuraFlex lids are impervious to water and climatic influences. They are maintenance-free and fundamentally easier to replace when damaged.
Available in 12 Standard Colours
The lightweight construction of DuraFlex lids, manufactured from high-grade UV-stabilised polyethylene, gives the same stability as heavier metal lids.
A rotomoulded DuraFlex lid can be bent or crushed several times and still revert to its original shape.

Bespoke Logos Can Be Applied To Any Bin showing what can be correctly recycled
  

For Further Information on the General Waste Bins: Please Phone DJE On 01709-730341 Or Via the Contact Form

  • Bin Compliances:
  • Double tank method as dictated by European Standard BS EN 840
  • Quality Control Certification to BS EN ISO 9001:2000
  • Bin complies in full with European Standard BS EN 840
  • Certification to Environmental Standard BS EN ISO 14001
  • Recycling bins comply in full with ‘The Noise and Emission in the Environment by Equipment for Use Outdoors Regulation 2001’. BSENISO3744:1985
  • Hot-dip galvanised to meet BS EN 1461: 2009
  • Bin body steel, all joints fully welded with all internal body seams continuously welded. All steel parts are galvanised after manufacture to meet BS 729.
  • Galvanised steel body with internal fully welded seams
  • Castors Compliant with EN840









Specialist 4 Wheel Metal Bins