DJE RECYCLING SYSTEMS. SPECIALIST SUPPLIERS.TAYLOR 4 WHEEL GALVANISED STEEL METAL BINS: 46 BUILD VARIANTS, UN APPROVED CLINICAL WASTE BINS, TRADE WASTE BINS, BOTTLE RECYCLING BINS, GENERAL WASTE BINS, FOOD WASTE RECYCLING BINS, CHAMBERLAIN WASTE BINS, DOMESTIC WASTE BINS, GREEN WASTE RECYCLING  BINS, PAPER RECYCLING BINS, PLASTIC RECYCLING BINS, WEEE BIN, DUO SPLIT BIN, DROP FRONT or DROP BACK PANEL BINS, HIGH-SPEED TOWING BINS, INTERNAL FORK POCKETS, EXTERNAL FORK POCKETS, FOOT OPERATED LID OPTION, TAYLOR GALVANISED STEEL 4 WHEEL BINS, TRADE WASTE, RECYCLING BINS, DURAFLEX LIDS, TRADE LIDS, HIGH DOME RECYCLING FLAP LIDS, 2 APERTURE BOTTLE RECYCLING LIDS,3 LID LOCK OPTIONS, STANDARD HANDLES, DANISH HANDLES,200mm STEEL CENTRED BOLT ON CASTORS,4 OPTIONS, TELEPHONE:01709 730341 :Email:info@djerecyclingsystems.com:

«»
8 BAN 1
8 BAN 2
8 BAN 3
8 BAN 4
8 BAN 5


Continental 1280 litre Clinical Medical Waste Bin includes internally welded seams and a galvanized steel body with 200mm black rubber steel-centred castors, a heavy-duty metal base, standard V Lock the ultimate medical waste container with a large capacity solution for clinical waste from hospitals, surgeries, care homes, clinics, dentists and Pharmaceutical Businesses.

Durable Galvanised Steel Body

Internally welded seams stop water penetration, preventing the corrosion that plagues less well-made metal waste containers. With full EN840 certification, they will give you exceptional lifetime value with limited downtime.

Steel-centred castor wheels manufactured with needle bearings, grease and rubber optimised for performance (we don’t offer plastic-centred castors)

The top frame is a complete welded tube, not split or open bend, with a diameter of 20mm. The use of the complete welded tube is very important here, as by using a complete tube there are no holes or gaps in which waste can leak into the top frame itself when the container is lifted on emptying.

The Comb Bar is manufactured from a single piece of steel with welded end pieces and gussets.1280 Litre steel body, Hot-Dipped Galvanised Steel along with internally welded seams, ensures robust protection in the harshest of environments and protects the container from internal corrosion due to residual waste being caught in exposed corners.

All four castors are 200mm Steel centred wheels manufactured with needle bearings, grease and rubber optimised for performance steel-centred rubber-tyred swivel castors, two of which are fitted with trailing brakes (Brakes are press to lock, press to release) are bolted on for easy replacement. Two-foot operated, trailing braking wheels at the front with two swivel wheels at the back. (Not Welded On or Plastic Centred Castors)

Caster Options 

Heavy Duty 20mm Casters: Mainly used with bins fitted with heavy-duty base, suitable for dense waste materials (Food Waste) and also for loading waste compactors and bins fitted with External and Internal fork pockets.

Non-marking casters are mainly used by hospitals, 

Heavy Duty Power Towing Castors  2 Swivel 2 Directional Lock is designed for towing up to 4 bins and also comes standard with heavy duty base, including bolt-on towing hitch and eye.

Bin Towing Containers provide a safe, practical answer to all towing requirements. Any container which is to be towed should be fitted with heavy-duty Power Towing castors or two swivel castors complete with directional locks, at one end of the container and no more than 4 containers are towed at any one time.

Please contact us on 01709 730341 if you need more information on “Towing Guidelines” or Castor Options and technical advice.

The 1280 Clinical Waste container is a powder-coated yellow using polyester powder, which is baked and cured in a controlled oven process Providing a layer of protection against corrosion, scratches/chipping and fading, Being one of the most long-lasting superior paint finish Which is then baked on through the High-Temperature Conveyor Drying System. Unlike a wet paint finish.

Duraflex  Lids

Taylor-DuraFlex lids are up to 4 times lighter than metal lids, thereby considerably reducing the risk of accidents to waste operatives and members of the public.
The lightweight construction of DuraFlex lids, made from high-grade UV-stabilised polyethene, gives the same stability as heavier metal lids.
A rotomoulded DuraFlex lid can be bent or crushed several times and still revert to its original shape.


For further information regarding 1280 clinical Waste Bin: Please Phone DJE On 01709-730341 Or Via the

 

DIN Lift Points For Side Loading, Central Locking Castors, External Fork Pockets, Bin Embossing, Danish Handles,

Taylor XL 1100 1280 Litre  Bin  Dimensions 

Bin Compliances:  

  • Double tank method as dictated by European Standard BS EN 840  
  • Quality Control Certification to BS EN ISO 9001:2000
  • Bin comply in full with European Standard BS EN 840
  • Certification to Environmental Standard BS EN ISO 14001
  • Recycling bins comply in full with ‘The Noise and Emission in the Environment by Equipment for use Outdoors Regulation 2001’. BSENISO3744:1985 
  • Hot-dip galvanised to meet BS EN 1461: 2009
  • Bin body steel, all joints fully welded with all internal body seams continuously welded. All steel parts are galvanised after manufacture to meet BS 729.
  • Galvanised steel body with internal fully welded seams