DJE RECYCLING SYSTEMS. SPECIALIST SUPPLIERS. BIOMASS.BIOWASTE. HOOKLIFTS. MATERIAL RECYCLING HOOKLIFT CONTAINERS.CONTINENTAL RECYCLING BINS.TELEPHONE: 01709 730341:Email:info@djerecyclingsystems.com:

 

«»
Taylor Galvanised Steel Bins
DJE TAYLOR 6
DJE TAYLOR 7
DJE TAYLOR 5
DJE TAYLOR 5

Taylor Bins are the industry-leading standard for waste and recycling containers regardless of the market sector. Referred to by many as the workhorse of the industry, the Continental range is available in an unrivalled number of sizes from 500 to 1280 litres.

        

Steel Bin Hot-Dipped Galvanised Steel along with internally welded seams, ensures robust protection in the harshest of environments and protects the container from internal corrosion due to residual waste being caught in exposed corners. Internally welded seams stop water penetration.

Highly Durable Galvanised Steel Body

Galvanised Steel Body, hot-dipped galvanised steel along with fully internally welded seams, ensures robust protection in the harshest of environments and protects the container from internal corrosion due to residual waste being caught in exposed corners.

Internally welded seams stop water penetration, preventing the corrosion that plagues less well-made metal waste containers. With full EN840 certification, they will give you exceptional lifetime value with limited downtime.
Steel-centred castor wheels manufactured with needle bearings, grease and rubber optimised for performance (we don’t offer plastic-centred castors)

Fully Internally welded seams prevent internal corrosion, whilst the hard-wearing galvanized steel body and base make for a durable, long-lasting container that delivers exceptional lifetime value.

The key benefits to owning continental recycling bins are they completely durable, low maintenance, and fire containment, long life, vandal proof and low cost of ownership compared to similar bins.

Galvanised Steel Panels Front, Rear and Side Panels are constructed from 1.5mm Mild Steel Swages are between 2 to 7mm and panels have a bowed-out geometry to spring out under heavy loads.

The top frame is a complete welded tube, not split or open bend, with a diameter of 20mm. The use of the complete welded tube is very important here, as by using a complete tube there are no holes or gaps in which waste can leak into the top frame itself when the container is lifted on emptying.

The Comb Bar is manufactured from a single piece of steel with welded end pieces and gussets.

Steel body, Hot-Dipped Galvanised Steel along with internally welded seams, ensures robust protection in the harshest of environments and protects the container from internal corrosion due to residual waste being caught in exposed corners.

plagues less well-made metal waste containers. With full EN840 certification, they will give you exceptional lifetime value with limited downtime, unlike plastic and other alternative steel commercial trade waste bins.

Internally welded seams stop water penetration, preventing corrosion.

All four castors are 200mm steel-centred rubber-tyred swivel castors, two of which are fitted with trailing brakes (Brakes are press to lock, press to release)

Castor brackets are manufactured from 3.5mm thick pressed steel to a minimum overall height of 30mm welded to the pressed container base. Castor brackets also include ‘Birds Beaks’ in their construction to resist material deformation.

All four castors are 200mm Steel centred wheels are manufactured with needle bearings, grease and rubber optimised for performance steel-centred rubber-tyred swivel castors, two of which are fitted with trailing brakes (Brakes are press to lock, press to release) are bolted on for an easy replacement. Two-foot operated, trailing braking wheels at the front with two swivel wheels at the back. (Not Welded On or Plastic Centred Castors)

Also available with Castors Options
Heavy Duty 20mm Casters: Mainly used with bins fitted with heavy duty base, suitable for dense waste materials (Food Waste) and also for loading waste compactors and bins fitted with External and Internal fork pockets.

None marking castors are mainly used by Airports and Hotel lobbies, Schools, Hospitals, Offices, and Shopping Centres, which have none, marking floor Vinyl, Epoxy, and Laminate Floor covering.

Continental Towing containers are fully adapted and built with a heavy-duty reinforced base and heavy-duty Power castors and removable tow link system allowing up to 4 wheeled containers to be moved at a time subject to bin size and materials, ground conditions and material weights.

Bin Towing Containers provide a safe, practical answer to all towing requirements. Any container which is to be towed should be fitted with heavy-duty Power Towing castors or two swivel castors complete with directional locks, at one end of the container and that no more than four containers are towed at any one time.

Heavy Duty Power Towing Castors  2 Swivel 2 Directional Lock is designed for towing up to 4 bins also the base is a heavy-duty build 

Please note we would not recommend using standard castors standard bin base for towing bins

Please contact us on 01709 730341 if you need more information on “Towing Guidelines” or Castor Options and technical advice.

Available with either a drop front or drop back panel
Continental Drop Front and Drop Back containers have been created to help avoid the health and safety risks associated with handballing bagged or bulky waste, often an important requirement within retail and manufacturing environments or easy emptying mainly used by charity shops,

Advantages Powder Coating: Taylor Continental Bin,

The container is powder coated option using polyester powder, which is baked and cured in a controlled oven process Providing a layer of protection against corrosion, scratches/chipping and fading, Being one of the most long-lasting superior paint finishes, and colour-durable quality finishes. Which is then baked on through the High-Temperature Conveyor Drying System. Unlike a wet paint finish.

Different Lid Types & Apertures depending on the size of the bin.

Lids are Rotary-molded double skin plastic with a minimum weight of 5.0 kilo manufactured in an aluminium mould for superior finish 15 Standard Colour Options.

Standard Trade Lid
The innovative rotary moulded, the double-skinned lid is waterproof and extra strong. The lid lock plug can be removed for easy post-fitting of a lid lock.
Available in a range of colours.
Flap Lid: Designed for paper or plastics recycling. The flap opening lid is available in a wide choice of colours from our range.
Brush Lid: This two aperture brush entry port lid is ideal for glass, cans and plastics recycling. Available in a wide choice of colours from our range.

Lid in Lid Flap, Opening 710mm / 72cm x 380mm / 38cm. The lid flap is easier to open as the flap is lighter. Located at the front of the bin, consumers do not have to reach to open the lid flap
Lid Lock Options

Bespoke Logos Can Be Applied To Any Bin showing what can be correctly recycled
Logo Options

Effective use of a logo alongside an eye-catching paint scheme is a key aspect in the design of your bin and can convey a powerful brand image or message regarding
container use. Personalise your containers with a complete range of Wrap logos or by adding bespoke logos,

For Further Information on Galvanised Steel General Waste Bins: Please Phone DJE On: 01709-730341 Or Via the Contact Form



Page Links





Build Options






None Standard Build




Return Home Page