Galvanised Steel Panels Front, Rear, and Side Panels are constructed from 1.5mm Mild Steel Swages are between 2 to 7mm and panels have a bowed out geometry to spring out under heavy loads.

The top frame is a complete welded tube, not split or open bend, with a diameter of 20mm. The use of the complete welded tube is very important here, as by using a complete tube there are no holes or gaps in which waste can leak into the top frame itself when the container is lifted on emptying.

The steel body, Hot-Dipped Galvanised Steel along with internally welded seams, ensures robust protection in the harshest of environments and protects the container from internal corrosion due to residual waste being caught in exposed corners.
Internally welded seams stop water penetration, preventing the corrosion that plagues less well-made metal waste containers. With full EN840 certification, they will give you exceptional lifetime value with limited downtime, unlike plastic and other alternative steel commercial trade waste bins.
Internally welded seams stop water penetration, preventing the corrosion that plagues less well-made metal waste containers.

 All four castors are 160mm or 200mm steel-centred rubber-tyred swivel castors, two of which are fitted with trailing brakes (Brakes are press to lock, press to release)

All four castors are 160mm steel-centred rubber-tyred swivel castors, two of which are fitted with trailing brakes (Brakes are press to lock, press to release)

Advantages Powder Coating: Taylor Continental Bin,
The container is a powder-coated option using polyester powder, which is baked and cured in a controlled oven process Providing a layer of protection against corrosion, scratches/chipping and fading, Being one of the most long-lasting superior paint finishes, and colour-durable quality finishes. Which is then baked on through the High-Temperature Conveyor Drying System. Unlike a wet paint finish.

Lids are Rotary-molded double skin plastic with a minimum weight of 5.0 kilo manufactured in an aluminium mould for superior finish 15 Standard Colour Options.

Lid Lock 

Bespoke Logos Can Be Applied To Any Bin showing what can be correctly recycled
  

For Further Information on the 660 Litre Bin: Please Phone DJE On: 01709-730341 Or Via the Contact Form

Technical Drawing:

Bin Compliances:  

• Double tank method as dictated by European Standard BS EN 840  
• Quality Control Certification to BS EN ISO 9001:2000
• Bin complies in full with European Standard BS EN 840
• Certification to Environmental Standard BS EN ISO 14001
• Recycling bins comply in full with ‘The Noise and Emission in the Environment by Equipment for use Outdoors Regulation 2001’. BSENISO3744:1985 
• Hot-dip galvanised to meet BS EN 1461: 2009
• Bin body steel, all joints fully welded with all internal body seams continuously welded. All steel parts are galvanised after manufacture to meet BS 729.
• Galvanised steel body with internal fully welded seams
• Castors Compliant with EN840