DJE RECYCLING SYSTEMS. SPECIALIST SUPPLIERS. BIOMASS.BIOWASTE. HOOKLIFTS. MATERIAL RECYCLING HOOKLIFT CONTAINERS.CONTINENTAL RECYCLING BINS.TELEPHONE: 01709 730341:Email:info@djerecyclingsystems.com:

 

«»
DJE TAYLOR 6
DJE TAYLOR 7
DJE TAYLOR 3
DJE TAYLOR 4
DJE TAYLOR 5

Stylish and easy to use, this 4-wheeled bin can be configured to your most exacting requirements, on even the most demanding waste collection rounds. Taylor Continental 1100 litre steel bin is stylish and easy to use, this four-wheeled bin can be configured to your most exacting requirements, on even the most demanding collection rounds. With full EN840 certification, the Continental 1100 will give you exceptional lifetime value with limited downtime, unlike plastic and other alternative steel commercial trade bins. Quality manufacture means Continental bins keep working, even under the toughest conditions. Internally welded seams stop water penetration, preventing the corrosion that plagues less well-made metal waste containers. From DIN to Danish Handles, to Lid Locks and corporate livery, the Continental 1100 is the most adaptable commercial waste bin around.
Quality manufacture means Continental bins keep working, even under the toughest conditions. Like all Taylor metal waste and recycling bins, the Continental 1100 has a hard-wearing galvanized steel body and base.

Taylor 1100 Steel Bin Hot-Dipped Galvanised Steel along with internally welded seams, ensures robust protection in the harshest of environments and protects the container from internal corrosion due to residual waste being caught in exposed corners. Internally welded seams stop water penetration.
Galvanised Steel Panels Front, Rear and Side Panels are constructed from 1.5mm Mild Steel Swages are between 2 to 7mm and panels have a bowed-out geometry to spring out under heavy loads.
The top frame is a complete welded tube, not split or open bend, with a diameter of 20mm. The use of the complete welded tube is very important here, as by using a complete tube there are no holes or gaps in which waste can leak into the top frame itself when the container is lifted on emptying.
1100 steel body, Hot-Dipped Galvanised Steel along with internally welded seams, ensures robust protection in the harshest of environments and protects the container from internal corrosion due to residual waste being caught in exposed corners.
Internally welded seams stop water penetration, preventing the corrosion that plagues less well-made metal waste containers. With full EN840 certification, they will give you exceptional lifetime value with limited downtime, unlike plastic and other alternative steel commercial trade waste bins.

All four castors are either 200mm Steel centred wheels manufactured with needle bearings, grease and rubber optimised for performance steel-centred rubber-tyred swivel castors, two of which are fitted with trailing brakes (Brakes are press to lock, press to release) are bolted on for an easy replacement. Two-foot operated, trailing braking wheels at the front with two swivel wheels at the back. (Not Welded On or Plastic Centred Castors)

Also available with Castors Options

Continental Towing containers are fully adapted and built with a heavy-duty reinforced base and heavy-duty Power castors and removable tow link system allowing up to 4 wheeled containers to be moved at a time subject to bin size and materials, ground conditions and material weights.
Bin Towing Containers provide a safe, practical answer to all towing requirements. Any container to be towed should be fitted with heavy-duty Power Towing castors or two swivel castors complete with directional locks, at one end of the container and no more than four containers are towed at any one time.
Please note we would not recommend using standard castors for towing up to 4 bins
Advantages Powder Coating: Taylor Continental Bin,
the container is a powder-coated option using polyester powder, which is baked and cured in a controlled oven process Providing a layer of protection against corrosion, scratches/chipping and fading, Being one of the most long-lasting superior paint finishes, and colour-durable quality finishes. Which is then baked on through the High-Temperature Conveyor Drying System. Unlike a wet paint finish.


Lids are Rotary-molded double skin plastic with a minimum weight of 5.0 kilo manufactured in an aluminium mould for superior finish 15 Standard Colour Options.

Standard Trade Lid

The innovative rotary moulded, double-skinned lid is waterproof and extra strong. The lid lock plug can be removed for easy post-fitting of a lid lock.

Flap Lid

Designed for paper or plastics recycling. The flap opening lid is available in a wide choice of colours from our range.

Brush Lid

 Two aperture brush entry port lid is ideal for glass, cans and plastics recycling. Available in a wide choice of colours from our range.

Lid in Lid

Lid in Lid Flap opening 710mm / 72cm x 380mm / 38cm. The lid flap is easier to open as the flap is lighter. Located at the front of the bin, consumers do not have to reach to open the lid flap

Lid Lock Options
  

Bespoke Logos Can Be Applied To Any Bin showing what can be correctly recycled
  
For Further Information on the 1100 Litre General Waste Bin: Please Phone DJE On: 01709-730341 Or Via the Contact Form

Technical Drawing:1100 L

Standard Build Compliances

  • Comb lifting bar (Frontal receiver) to meet EN840-2 regulation
  • Simple, robust steel hinge bar secured by a split pin
  • The double-skinned rotationally moulded lid is both durable and UV resistant. Available in a choice of colours
  • The lid recovers even from extensive deformation unlike injection moulded plastic lids
  • The design avoids water draining into the bin, unlike some alternatives
  • Handles designed to EN 840 for ergonomic handling and health & safety by keeping hands away from lifting gear
  • The continental bins comply with EN840 standard whereas flat-based bins fall short of this compliancy
  • Standard Build Compliances
  • Double tank method as dictated by European Standard BS EN 840
  • Quality Control Certification to BS EN ISO 9001:2000
  • Bin comply in full with European Standard BS EN 840
  • Certification to Environmental Standard BS EN ISO 14001
  • Recycling bins comply in full with ‘The Noise and Emission in the Environment by Equipment for use Outdoors Regulation 2001’. BSENISO3744:1985
  • Hot-dip galvanised to meet BS EN 1461: 2009
  • Bin body steel, all joints fully welded with all internal body seams continuously welded. All steel parts are galvanised after manufacture to meet BS 729.
  • Galvanised steel body with internal fully welded seams
  • Castors Compliant with EN840
  • The patented top frame is an unbroken pressed steel tube designed to give maximum rigidity to the container during lifts for a longer life span.
  • The patented comb bar is Rolled section tube with a step profile to ensure maximum rigidity and safe and efficient fit on vehicle lifts. The lifting bar must integrate with all refuse collection vehicles meeting the specification in the European Standard EN 15.


   Trade Bins
General Waste
Quick Links







Recycling Bins
Mixed Dry Recyclables 






Bottle Recycling Bins