DJE RECYCLING SYSTEMS. SPECIALIST SUPPLIERS.TAYLOR 4 WHEEL GALVANISED STEEL METAL BINS: 46 BUILD VARIANTS, UN APPROVED CLINICAL WASTE BINS, TRADE WASTE BINS, BOTTLE RECYCLING BINS, GENERAL WASTE BINS, FOOD WASTE RECYCLING BINS, CHAMBERLAIN WASTE BINS, DOMESTIC WASTE BINS, GREEN WASTE RECYCLING  BINS, PAPER RECYCLING BINS, PLASTIC RECYCLING BINS, WEEE BIN, DUO SPLIT BIN, DROP FRONT or DROP BACK PANEL BINS, HIGH-SPEED TOWING BINS, INTERNAL FORK POCKETS, EXTERNAL FORK POCKETS, FOOT OPERATED LID OPTION, TAYLOR GALVANISED STEEL 4 WHEEL BINS, TRADE WASTE, RECYCLING BINS, DURAFLEX LIDS, TRADE LIDS, HIGH DOME RECYCLING FLAP LIDS, 2 APERTURE BOTTLE RECYCLING LIDS,3 LID LOCK OPTIONS, STANDARD HANDLES, DANISH HANDLES,200mm STEEL CENTRED BOLT ON CASTORS,4 OPTIONS, TELEPHONE:01709 730341 :Email:info@djerecyclingsystems.com:

«»
1 METAL 1 1280 TRADE BIN
1 METAL 2 1280 RECYCLING BIN
1 METAL 3 1280 BOTTLE BIN


The 1280 recycling bin offers the largest capacity in the Taylor Bin range in the same footprint as the Mk2 1280. Reduced collection frequency can also be achieved by providing the maximum volume possible within the arc of an RCV bin lift, without any compromise to the product's unrivalled manoeuvrability and durability.

Standard Build: 1280 Litres Galvanised. Recycling Bin Fitted with High Dome Recycling Flap Lid Suitable For Recycling Paper and Plastics With Internally Welded Seams, Welded On Comb Bar, Standard Side Handles. EN840 compliant, internally seam-welded Hot dip galvanised body, Welded comb bar, X 4 200mm Steel Centred Bolt On Castors For Easy Replacement, X 2 Foot Operated Standard Side Braked Castors X 2 Swivel Rear Castors Fitted with Black Duraflex Back Trade Lid, Lock and Base Drain Plug. Prices from: £542.00 Excluding VAT. (12 Month Warranty)

Standard Build Options and Bin Finishes:
Heavy Duty X 4 200mm Steel Centred Bolt On Castors For Easy Replacement, X 2 Foot Operated Braked Castors X 2 Swivel Rear Castors Options: Side loading DIN points, Powder coated body 12 colour options (See Colour Chart )
3 Lid types & apertures,  Duraflex Black Trade Lid, High Dome 2 Aperture Bottle Recycling Lid, High Dome Recycling Flap Lid: Drain plug varieties Standard Lid Drain Plug, (Rodent Replant Drain Pug) Powder coated body colour options (See Colour Chart), Standard vinyl graphics, Custom embossing External fork pockets X4 200mm or Heavy Duty High Speed 200mm Heavy Duty Directional towing castors, Towing Eye Towing Hitch, Bespoke vinyl graphics
Internal Fork Sleeves Suitable For Rotating The bin 360 Degrees

  
  
Fully Compliant with EN840 certified and available with a flap lid ideal for paper and cardboard or brush apertures ideal for cans and bottles, combined with WRAP or bespoke logo options and a wide choice of colours. The Taylor Mk2 1280L  Recycling bin is perfect for all your recycling containment needs.

Taylor Mk2 1280L: 1280 Litre Capacity Recycling Container / Bin, Galvanised Steel Shell, Internally seams welded, The comb lifting bar is manufactured from 2.0mm** thick galvanised steel and features 7 gussets for additional strength DuraFlex High Dome Recycling Flap Lid Aperture 500 x 150 mm Manufactured from high-grade UV-stabilised Polyethylene, Taylor 200mm Steel Centred castors, 2x Back / Rear swivel Castors, 2 x foot operated braked castors foot operated, Standard Side Handles

Image Mk2 1280 For Guild Line Purposes
Galvanised Steel 4 Panel Shell
Seam Welded Internally
Height 1280mm
Depth 1057mm
Width 1244mm
S.W.L 440Kg
Standard Sided Handles
Welded Comb Bar
Standard Drain Plug
X4 Steel Centred 200mm Castors
2 Rear Swivel Castors: 2  Front Foot Operated Locking Castors
3 Duraflex Lid Options
See Drawing At the Bottom Of the Page

1280L Recycling Bin Specification and Build Finish Options

  • Galvanised Steel Body, hot-dipped galvanised steel along with fully internally welded seams, ensures robust protection in the harshest of environments and protects the container from internal corrosion due to residual waste being caught in exposed corners.
  • The container can be powder-coated option using polyester powder, which is baked and cured in a controlled oven process providing a layer of protection against corrosion, scratches/chipping and fading, being one of the most long-lasting superior paint finishes, and colour-durable quality available in 12 standard colours
  • The Comb Bar is manufactured from a single piece of steel with welded end pieces and gussets.
  • The top frame is a complete welded tube, not split or open bend, with a diameter of 20mm. The use of the complete welded tube is very important here, as by using a complete tube there are no holes or gaps in which waste can leak into the top frame itself when the container is lifted on emptying
  • Container Bin Lids are Rotary-moulded double-skin plastic with a minimum weight of 5.0 kilos manufactured in an aluminium mould for a superior finish with 12 Standard Colour Options.
  • Container Bin Lid Options
  • Standard Trade Lid
  • 2 Aperture Bottle Brush Lid
  • Recycling Flap Lid
  • Bolt-on Castor Options for easy replacement
  • Standard 200mm Steel Centred Castors
  • Heavy Duty 200m Castors
  • 200mm High-Speed Towing Castors
  • None Marking 200mm Castors

Taylor Mk2 1280 Specification and Castor Options 

All four castors are 200mm steel-centred, rubber-tyred swivel castors, two of which are fitted with trailing brakes (Brakes are foot-press to lock, foot-press to release).

200 mm Standard castors, Rubber tyres, Needle roller bearings, Trailing brakes, Pressed hubs, 3.5mm top plate, Zinc and clear passivate, 1230 Kgs static load rating, 690 Kgs dynamic load rating.

All four castors are 200mm steel-centred wheels manufactured with needle bearings, grease and rubber optimised for performance steel-centred rubber-tyred swivel castors, two of which are fitted with trailing brakes (Brakes are press to lock, press to release) and are bolted on for an easy replacement. It is two-foot-operated, with trailing braking wheels at the front and two swivel wheels at the back. (Not Welded On or Plastic Centred Castors)

Advantages of Powder Coating:  The powder-coated body has higher resistance against scuffs, scratches, corrosion and colour discolouration/fading. 

1280 Duraflex High Dome Recycling Flap Lid

Duraflex Taylor: ML1100RM-FLA 1280 Litre Recycling lid with plastic flap To fit Taylor, 1280 litre containers L: 934mm x W: 1240mm x H: 164mm Plastic Flap Aperture Size: W: 500mm H: 150mm: High Dome and Deep Ribbing Provides Exceptional Strength

DuraFlex Taylor High Dome Recycling Flap Lid Dimensions 

Duraflex Taylor Mk2 1280L High Dome Recycling Flap. The lightweight construction of DuraFlex lids, manufactured from high-grade UV-stabilised polyethylene, gives the same stability as heavier metal lids.

A rotomoulded DuraFlex lid can be bent or crushed several times and still revert to its original shape.

DuraFlex lids are up to 4 times lighter than metal lids, thereby considerably reducing the risk of accidents to waste operatives and members of the public

Flap Lid Designed for paper or plastic recycling. Flap opening lid is available in a wide choice of colours from our range.

Effective use of a logo alongside an eye-catching paint scheme is a key aspect in the design of your bin and can convey a powerful brand image or message regarding

Container use. Personalise your containers with a complete range of Wrap logos or by adding bespoke logos,

The Taylor Mk2 1280 Litre Further Build and Finish Options

DIN Lift Points, Central Locking Castors, Internal Fork Pockets, External Fork Pockets, Bin Embossing, Danish Handles,

For Further Information on the 1280 MK2 Litre Bin: Please Phone DJE On 01709-730341 Or Via the Contact Form

The  Taylor 1280 Litre Further Build and Finish Options

DIN Lift Points, Central Locking Castors, External Fork Pockets, Bin Embossing,

Dimensions: 1280 Litre Trade Waste General Waste Bin

Bin Compliance:  

  • Double tank method as dictated by European Standard BS EN 840  
  • Quality Control Certification to BS EN ISO 9001:2000
  • Bin comply in full with European Standard BS EN 840
  • Certification to Environmental Standard BS EN ISO 14001
  • Recycling bins comply in full with ‘The Noise and Emission in the Environment by Equipment for Use Outdoors Regulation 2001’. BSENISO3744:1985 
  • Hot-dip galvanised to meet BS EN 1461: 2009
  • Bin body steel, all joints fully welded, with all internal body seams continuously welded. All steel parts are galvanised after manufacture to meet BS 729.
  • Galvanised steel body with internal fully welded seams
  • Castors Compliant with EN840